Language [ Change ]
Scientific Equipment Division Power Solutions and Process Automation Division Download
SH Euro Tech Newsletter
Contact Us Request Quote
About Us Company News Investor Relations Job Opportunities


  Product Directory
Product Search
SR510 Lock-In Amplifiers--SRS
     Product Information
  SR510 714K 

Font Size LMS
  • 0.5 Hz to 100 kHz frequency range
  • Current and voltage inputs
  • Up to 80 dB dynamic reserve
  • Tracking band-pass and line filters
  • Internal reference oscillator
  • Four ADC inputs, two DAC outputs
  • GPIB and RS-232 interfaces

Sine Wave Mixing
The core of the SR510/SR530 is a precision analog sine-wave multiplier. Lock-ins use a multiplier (demodulator) to translate the input signal (at the reference frequency) down to DC where it can be filtered and amplified. Many lock-ins use square wave multipliers which introduce spurious harmonic responses. The SR510/SR530 use clean sine-wave multipliers which are inherently free of unwanted harmonics.

Signal Input
The SR510 and SR530 have differential inputs with 7 nV/√Hz of input noise and a 100 MΩ input impedance. The input can be configured as a voltage input, or as a current input with 106 V/A gain and an input impedance of 1 kΩ to virtual ground. Full-scale sensitivities from 500 mV down to
100 nV are available. Three input prefilters can be selected. The first is a line notch filter providing 50 dB of rejection at the line frequency. The second filter similarly provides 50 dB of rejection at the second harmonic of the line frequency. The third filter is a band pass filter which automatically tracks the reference frequency. These three filters can eliminate much of the noise in the signal before it is amplified.

Reference Input
The reference input can be set to lock to sine waves or to either edge of a pulsed reference. The reference frequency range is 0.5 Hz to 100 kHz, and detection at both the fundamental and second harmonic of the reference is allowed. A convenient, built-in frequency meter constantly measures
and displays the reference frequency with 4-digit resolution. The reference can be phase shifted with 0.025° resolution from the front panel, or shifted in 90° increments for easy measurement of quadrature signals. On the SR530, an autophase feature lets you quickly determine the phase of the signal relative to the reference with a single key-press.

Output Time Constants
Two stages of filtering after the phase sensitive detector are provided. Time constants can be chosen as long as 100 seconds for maximum noise reduction, or as short as 1 ms (20 μs with modification) for use in real-time servo loops. The two filter stages allow a rolloff of 6 or 12 dB/octave.

Dynamic Reserve
The dynamic reserve of a lock-in amplifier at a given fullscale input voltage is the ratio (in dB) of the largest interfering signal to the full-scale input voltage. The largest interfering signal is defined as the amplitude of the largest signal at any frequency that can be applied to the input before the lock-in cannot measure a signal with its specified accuracy. The SR510 and SR530 have a dynamic reserve of between 20 dB and 60 dB depending on the sensitivity scale. Selecting the band pass filter adds an additional 20 dB of dynamic reserve making the maximum dynamic reserve for these
lock-ins 80 dB.

Offset and Expand
The SR510/SR530's offset and expand features make it easy to look at small changes in a large signal. Output offsets of 0 % to 100 % of full scale can be selected manually, or by using auto-offset, which automatically selects an offset equal to the signal value. Once the signal is offset, a 10× expand is available to provide increased resolution when looking at small changes from a nominal value.

Analog and Digital Displays
Precision analog meters, and 4-digit digital displays are standard on both lock-ins. On the SR510, you can select displays of the signal amplitude, the signal offset or the measured noise. On the SR530, the first pair of displays show the signal components in rectangular form (X and Y), polar
form (R and θ), the offset, noise, or the value of the rear-panel D/A outputs. The other digital display on both lock-ins can be configured to show either the reference phase or the reference frequency.

Noise Measurement
The SR510/SR530's noise measurement feature lets you directly measure the noise in your signal at the reference frequency. Noise is defined as the rms deviation of the signal from its mean. The SR510/SR530 will report the value of the noise in both a 1 Hz and 10 Hz bandwidth around the
reference frequency.

Internal Oscillator
An internal voltage-controlled oscillator provides both an adjustable amplitude sine wave output and a synchronous, fixed amplitude reference output. The sine wave amplitude can be set to 0.01, 0.1 or 1 Vrms and can drive up to 20 mA. The oscillator frequency is controlled by a rear-panel voltage input and can be adjusted between 1 Hz and 100 kHz. Typically, the sine wave output is used to excite some aspect of an experiment, while the reference output provides a frequency reference to the lock-in.

A/Ds and D/As
There are four A/Ds and two D/As on the rear panel that provide flexibility in interfacing the SR510/SR530 with external signals. These input/output ports measure and supply analog voltages with a range of ±10.24 VDC and a resolution of 2.5 mV. The A/Ds digitize signals at a rate of 1 kHz. The D/A output is ideal for controlling the frequency of the SR510/530's internal voltage-controlled oscillator. A built-in ratio feature allows the SR510/SR530 to calculate the ratio of its output to a signal at one of the A/D ports. This feature is important in servo applications to maintain a constant loop gain, or in experiments that normalize a signal to an intensity level.

Available Preamplifiers
Although the SR510 and SR530 are completely self contained and require no preamplification, sometimes an external preamplifier can be useful. Remote preamplifiers provide gain where it's most important, right at the detector, before the signal-to-noise ratio is permanently degraded by cable noise and pickup. The SR550 FET-input preamplifier, the SR552 bipolar-input preamplifier, and the SR554 transformer-input preamplifier are ideally suited for use with the SR510/SR530 lock-ins. These preamplifiers are especially useful when measuring extremely low-level signals.

Computer Interfaces
An RS-232 computer interface is standard on both the SR510 and SR530. An optional GPIB interface is also available. All features of the instruments can be queried and set via the computer interfaces.


[ top ]

Copyright 2023 EURO TECH (FAR EAST) LTD. All rights reserved