2301-20
HUMIDITY MODULE |
Temperature 1ch and humidity 1ch.
Use withoptional sensor 9764
Temperature: -40.0 to 85.0¡ãC
Humidity: 0.0 to 100%RH |
2302-20
Pt MODULE |
Temperature 2ch (Pt100)
2 types of platinum resistance thermo sensors available |
2303-20
TC MODULE |
2ch temperature measurement using thermocouples (K, E, J, T). 4 TC types available |
2304-21
PULSE MODULE |
For 2ch pulse input (voltage,contact), maximum 16M pulses/interval
| Input pulse: |
4kHz max. (voltage/electroniccontact signal)
25Hz max. (mechanical contact signal) | |
2305-20
INSTRUMENTATION MODULE |
Voltage / current 2ch measurement, for 4-20mA, 1-5V instrumentation signals |
2331-20
POWER METER MODULE |
For single circuit power measurement.
Single-phase 2-wire to 3-phase 4-wire
Voltage: AC 100/200V (70 to 130VAC/140 to 260VAC)
| Current: |
AC 5A (with 9765 or 9695-02 CLAMP ON SENSOR), AC 50A (with 9695-02) ,AC 100A (with 9695-03 or 9661-01),AC 500A (with 9661-01) | |
2332-20
POWER METER MODULE |
For multiple circuit power measurement: from 6 circuits of single-phase 2-wire to 3 circuits of 3-phase 3-wire installations
Voltage: AC200V (100V accepted at 200V range) (70 to 260VAC)
| Current: |
AC 5A (with 9765 or 9695-02 CLAMP ON SENSOR), AC 50A (with 9695-02), AC 100A (with 9695-03 or 9661-01), AC 500A (with 9661-01) | *3-phase 4-wire circuit cannot be measured |
2341-20
INPUT MODULE |
For recording the status of contact/voltage signals
8ch input, easily capture on/off status with LED |
2342-20
OUTPUT MODULE |
Outputs control signal according to commands from above or based on measurement module data; 8ch output (open corrector) |
2343-20
RS LINK MODULE |
For communicating with RS-232C interface equipped instruments
| Interface: |
RS-232C, Transfer speed: 57.6kbps(max.)
Please inquire regarding compatible instruments.
(Existing compatible HIOKI instruments include Models 3331 and 3332.) | |
2351-20
AIR MODULE |
2.4GHz band SS wireless technology(RS-232Cequipped)
Transfer speed: 51.9kbps(fixed), RS-232C: 57.6kbps(max.)
*Note: Requires modification according to regional or national standards. Contact HIOKI for more information. |
2352-20
WIRE MODULE |
For small-scale measurement systems or built-in use
Interface: RS-232C, Transfer speed: 57.6kbps(max.) |
2353-20
LAN MODULE |
For data logging via LAN
Interface: 10BASE-T |
2361-20
AC POWER MODULE |
Power supply for the communication modules and measurement modules (max. 10 modules)
Input: AC 100 to 240V, Output: DC5V/2.4A |
2362-20
DC POWER MODULE |
Power supply for the communication modules and measurement modules (max 10 modules)
Input: DC 19 to 36V, Output: DC5V / 2.4A |
2391-20
MODULE BASE |
For connecting modules (3 slots reserved for power supply and communication module)
2391-21: For relay and master station
2391-22: 5 measurement module slots
2391-23: 10 measurement module slots
*Model 2331-20 uses 2 slots |
2392-20
MODULE BASE |
For connecting modules (also connects with additional module bases for increased measurement capabilities)
| 2392-21 : 1 slot; |
includes power and internal bus connection terminal |
| 2392-22*: 2 slot; |
connect with 2391-21 for additional measurement modules | * POWER MODULE not compatible; must use with Model 2392-21 to access POWER MODULE |
