2216e,2208e,and  2204e  General  purpose
                    PID  Temperatutr  Controlers
               
PID  and  valve  positioning 
Extrusion  with  optimized  fan,  water,  or  oil  cooling  and  alarms 
Ovens,  furnaces  and  lab  applications 
Modular  I/O  options 
ModBus  (RS232,  RS485  &  RS422)  DeviceNet  &  PSDIO  Communications 
DIN  RAIL  MOUNTING  OPTION
Available  in  1/16,  1/8  and  1/4  DIN  panel  sizes  the  2200e  series  are  configurable  for  PID,  On/  Off  or  motorized  valve  control  for  heat  only  or  heat/cool  applications,  satisfying  both  electrical  and  gas  heating  requirements.  Self-tuning  and  customized  cooling  algorithms  are  included  to  optimize  control  performance.  These  units  employ  patented  INSTANT  ACCURACY"!  technology  on  scaleable  universal  inputs  accepting  nine  standard  thermocouple  and  RTD  inputs,  DC  process  inputs  or  downloadable  custom  inputs. 
Modular  heating  and  cooling  outputs  are  provided,  plus  one  or  two  alarm  relay  outputs.  The  1/8  and  1/4  DIN  units  have  two  digital  inputs  to  select  auto/manual  transfer,  standby  mode,  second  setpoint  or  alarm  acknowledge.  The  1/4  DIN  model  2204e  has  an  additional  10  amp  high  current  output  option. 
Eliminate  ammeters  using  PDSI®  current  monitoring  facility.  Heater  current  may  be  displayed  and  open  and  short  circuit  faults  detected  and  alarmed. 
Digital  communications  with  Modbus®  RTU  or  DeviceNet?protocols  are  available  for  easy  con-  nection  to  PLC™  or  PC  based  supervisory  control  and  data  logging  systems.  The  operator  interface  can  be  customized  to  present  only  those  parameters  that  an  operator  needs  to  see  and  adjust,  while  all  other  parameters  are  locked  away  under  password  protection.  An  optional  external  output  module  can  be  ordered  to  convert  the  logic  output  to  a  relay.  An  external  precision  resistor  input  adapter  can  accept  4-20mA  process  inputs. 
Ramp-dwell  programming
A  simple  ramp  and  hold  profile  can  be  programmed  using  the  internal  ramp  generator  and  dwell  timer.  With  custom  cooling  algorithms,  these  controllers  are  ideal  for  plastics  extrusion. 
Specifications
Control  modes:  PID,  ON  /  OFF  or  motorized  valve  control 
Supply  voltages:  85-264VAC,  10watts  maximum 
Operating  ambient:  0-55°C,  0-90%RH  non-condensing 
Inputs:  Nine  standard  thermocouple  types.  Pt100.  4-20mA  linear. 
Custom  input  available 
Output  ratings:  Relay:  2A,  264Vac  resistive 
Logic:  18Vdc,  20mA 
Triac:  1A,  264Vac  resistive 
DC:  Isolated  0-20mA,  at  12Vdc  Communications:  Modbus®  ASCII,  DeviceNet
|